I got a HDD dock from startech.com. It works great and does everything I need. The problem is it has the brightest goddamn blue LED I have ever seen. It is so unnecessarily bright. My eyes hurt looking in the same direction as it. What the fuck should I do? Return it? De solder the stupid ass LED? It works great aside from this one issue.
Edit: I opened the thing and drew with sharpie on the LED. It’s bearable to look at now.
Duct tape or electrical tape would fix this in a jiffy.
Duck tape it. Because every single product have decided that blinding blue leds is the way to go.
I miss my dim red leds.
I use duct tape to cover bright lights
This is where black electric tape can be your best friend.
I bought a keyboard from ThinkGeek that had an LED that would hit me right in the eye. A little piece of tape and that keyboard served me well for years.
I usually use a little tiny piece of electrical tape, which should work unless the power button is absolutely minuscule. Desoldering it also works, but is more permanent.
You can get LED film off Amazon for like, $7. It blocks those annoying LEDs on tech devices, monitors, wall outlets, kitchen appliances, and my nemesis, smoke detectors with stupidly bright LEDs.
Best $7 you’ll spend this year.
My monitor had a bright blue power LED smack in the middle of the lower bezel. I took it apart on day one and brutally ripped out the LED, only then did I ever connect it to my computer.
Tape
Blue LEDs are the worst offenders. No need to return it as long as you keep a bit of black tape ready. If you still need it as an indicator, you can use layers of yellowish tape. The one used while painting your walls works great. Masking tape it’s called in English.
No, but I did case mod a computer for this once. My Fractal Node 202 my last computer is in has a very bright white power button LED, too damn bright. Fortunately in this case it’s a standard 5mm through hole LED standing up off the board on its leads a bit, bent to point out the front. So I bent it to point upward. Dimmed it down significantly.
Likely not, it seems wasteful if the product is otherwise good in all other important regards. I’d just cover up the LED with tape or paint.
I have marker pens and led dims so…no
I either tape the things with Isolation in dark to see nothing or the Painters-Tape which is yellow and partly lets light through.
But colored isolation band lets the light through a bit too.
Yes but also I’ve just put electrical tape over many an item.
The RGB craze is the worst.
Last pc i built i had 1 hard request, “I don’t want a damn xmas tree in my pc.” girl laughed and the only light is from the heat sync :(
Yeah it sucks that I sleep in the same room as my computer. It’s damn near impossible to find a case without RGB.
Should be possible to just not plug them in.
But I have no idea why they are there in the first place.
Amen. I do love LEDs since their dawn and have a big-ass collection. But on every single stupid computer thing? I don’t wanna pay extra just because my mouse can have stupid rgb-lights. Or my damn RAM. It adds absolutely nothing, costs more and has another part that will go broke.
I hate the rgb-craze…
One my Xbox controller’s light is so bright it could power our solar-panels. I had to put multiple Band-Aids on it 🫤
Tape
The problem with that is the LED also functions as the power button.
Carefully trimmed sticker?
EDIT: Ah, I see you’ve handled it. Carry on, then.
i had a monitor like that once. big bright af blue power light baked into the power button, bottom center of the bezel. blue led was the ‘new’ thing back then. the barton-era matching pc (which i didn’t have) had a larger matching button on its front. if you know your '00s pavilions, you know the ones.
it was horrible. that monitor lived its entire life with a black piece of paper taped over the whole switch and light. i was not saddened when it finally gave up and failed to turn on. i was more annoyed that it took 15 years for it to fail.
Press on the tape?
The problem is it’s a weird recessed button.
Nail polish might work.
Loose piece of tape … then press on the weird recessed piece of tape
Tape a dry bean into the recess.
This is a hilarious solution
LMAO, maybe next time
I would find this very annoying.
Mask off the dock one spray of spray paint in just the LED resses
